SIMULATION ELECTRIC MIRROR CONTROL DEVICE

Abstract

The positive edge mirror control system incorporates a mirror positioning
feature and automatically controls the mirror position of pre-configured memory
states required by the driver to facilitate driving. quick control mirror. The positive
edge mirror system with these features has been fitted on expensive cars both at
home and abroad. However, up to now, we have not yet published any research on
the simulation, design and manufacture of positive edge mirror controllers with the
above mentioned features. For the purpose of mastering the technology of positive
edge mirror control, the article presents a simulation study of positive edge mirror
controllers featuring the above features. Simulation studies were conducted using
Proteus and CodevisionAVR software. Proteus software is used for circuit simulation
and CodevisionAVR software is used to write programs. The simulation results show
that the controller can: Control of the position of the mirror surface, fold open the
mirror side by the buttons on the conventional car; Remember five mirror positions
required by the driver (Number of memory locations can be expanded according to
the specific requirements of the car manufacturer); Automatically control the mirror
position of the previously recalled state as required by the driver.