Optimization of cutting parameters for minimum the surface roughness when grinding SKD11 steel on cylindrical grinder
Abstract
This paper presents the research on the optimization of cuttingparameters for minimum surface roughness of SKD11 steel on
cylindrical grinder using Hai Duong grinding wheel. We used BoxBehken matrix with 15 runs for selecting optimization value of velocity
of workpiece(), depth of cut ()and feed rate ( ). The results
showed that optimization value of , , are 26
, 0.09()
and 2(/!") respectively and = 0.4732().
điểm /
đánh giá
Published
2019-07-18
Section
RESEARCH AND DEVELOPMENT