Tập 60.Số 05 (2024)

RESEARCH AND DEVELOPMENT

• WARM EXTRUSION OF AA7075 ALUMINUM ALLOY

  Manh Tien Nguyen, Trong Tan Le

  3

  • pdf
• APPLICATION OF TECNOMATIX IN SIMULATION AND OPTIMIZATION OF MANUFACTURING PROCESSES IN THE FACTORY

  Hoang Lam, Nguyen Huu Loc, Nguyen Xuan Tung Lam, Pham Le Bac, Pham Van Sang

  8

  • pdf
• STUDY ON THE INFLUENCE OF THE NOZZLE PROFILE ON THE RECOILLESS CONDITION OF THE RECOILLESS GUN

  Nguyen Minh Phu, Vo Van Bien, Mai Anh Quang, Nguyen Van Tuyen

  15

  • pdf
• IMPROVING MATERIAL WAREHOUSE PREMISES AT THANG LONG METAL COMPANY BY RANKED POSITION WEIGHTED METHOD (RPW)

  Pham My Huyen, Pham Thi Minh Hue, Nguyen Van Thinh

  20

  • pdf
• FORECASTING THE DEMAND FOR PRODUCTION OF VEHICLES USING ARIMA MODEL AT FACTORY No. 3, THANG LONG METAL COMPANY

  Nguyen Thi Thanh Binh, Pham Thi Minh Hue

  29

  • pdf
• DETERMINATION OF GAS FLOW PARAMETERS IN THE NOZZLE OF A SOLID FUEL ROCKET ENGINE BY ANALYTICAL METHOD

  Vo Van Bien, Nguyen Minh Phu

  30

  • pdf
• STUDY ON FORMABILITY SIMULATION OF ALUMINUM SHEET 1.5MM THICKNESS

  Ma Van Viet

  35

  • pdf
• THE INFLUENCE OF TECHNICAL FACTORS AND FUEL SOURCES ON SMALL-SCALE BIOMASS POWER PLANT INVESTMENT AND SOLUTIONS

  Nguyen Duc Quyen, Nguyen Duc Minh, Nguyen Van Lanh, Nguyen Thanh Nghi , Le Thi Kim Phung, Pham Quoc Khanh, Pham Quoc Khanh

  38

  • pdf
  • pdf
• DESIGN OF POWER SYSTEM STABILIZERS BASED ON THE MODEL OF SINGLE MACHINE INFINITE BUS POWER SYSTEM

  Hong Quang Nguyen, Dac Nam Nguyen, Le Quang Vinh

  44

  • pdf
• DEVELOPING A MULTIBODY MODEL OF AN ARTICULATED VEHICLE WITH A FLEXIBLE SEMI-TRAILER

  Truong Dang Viet Thang, Trinh Minh Hoang, Nguyen Trong Hoan, Nguyen Minh Toan

  50

  • pdf
• STUDYING THE INFLUENCE OF THE NOZZLE PROFILE ON THE WORKING PERFORMANCE OF A SOLID-FUEL ROCKET ENGINE

  Vo Van Bien, Nguyen Minh Phu, Nguyen Duy Phon

  54

  • pdf
• ASSESSMENTS OF ENERGY EFFICIENCY OF THE GREEN MQL-ASSISTED MULTI-ROLLER BURNISHING PROCESS

  Trung-Thanh Nguyen, Thai-Le Minh, Thai-Nguyen Chung, Truong-An Nguyen, Quan-Nguyen Van, Huu-Toan Bui , Hung-Le Xuan, Tuan-Ngo Van, Luan-Van Le

  59

  • pdf
• APPLICATION OF BLOCKCHAIN TECHNOLOGY FOR MANGO TRACEABILITY MODEL IN VIETNAM

  Trinh Phuong Tam, Nguyen Minh Trieu, Nguyen Truong Thinh

  64

  • pdf
• ARTIFICIAL NEURAL NETWORK-BASED SPECIFIC CUTTING ENERGY MODEL FOR THE ROTARY TURNING MOLD STEEL

  Trung-Thanh Nguyen, Thai-Le Minh, Thai-Nguyen Chung, Truong-An Nguyen, Quan-Nguyen Van, Huu-Toan Bui , Hung-Le Xuan, Tuan-Ngo Van, Luan-Le Van

  72

  • pdf
• DESIGN OF AUTOMATIC MANGO CLASSIFICATION SYSTEM BASED ON EXTERNAL FEATURES AND WEIGHT

  Trinh Phuong Tam, Nguyen Minh Trieu, Nguyen Truong Thinh

  77

  • pdf
• INVESTIGATE THE EFFECT OF THE THROTTLING RING WEAR ON THE MOVEMENT OF THE ARTILLERY ON THE TANK WHEN FIRING

  Tran Van Tan, Nguyen Minh Phu, Vo Van Bien

  82

  • pdf
• INVESTIGATION OF BACK-PROPAGATION NETWORK STRUCTURES IN PREDICTING WEAR VALUE OF CBN-COATED TOOLS DURING HIGH-SPEED DRY TURNING OF SKD11 STEEL

  Hoang Thi Dieu, Tang Quoc Nam, Phung Van Binh, Dao Van Duong, Nguyen Van Trung

  87

  • pdf
• MOTORBIKE PARKING SYSTEMS REVOLUTION THROUGH ELECTRONIC PAYMENT AND AUTOMATIC CARD ISSUANCE

  Dang Tri Dzung, Nguyen Truong Thinh

  92

  • pdf
• STUDY ON THE INFLUENCE OF CUTTING PARAMETERS ON CONSUMPTION ENERGY AND SURFACE ROUGHNESS IN HIGH-SPEED FACE MILLING OF SKD11 STEEL AFTER HEAT TREATMENT USING ARTIFICIAL ECO-SYSTEM ALGORITHM

  Dao Van Duong, Nguyen Van Trung, Le Van Tan, Duong Xuan Bien, Dang Van Hai

  97

  • pdf
• LOW-TEMPERATURE MAGNETORESISTANCE EFFECT AND THERMOELECTRIC PROPERTIES OF POLYCRYSTALLINE FeAs2 THIN FILM ON LaAlO3 (100) SUBSTRATE

  Duong Van Thiet, Nguyen Xuan Chung, Nguyen Tien Tung, Nguyen Quoc Tuan, Nguyen Minh Quang, Sunglae Cho

  104
• MODELING AND OPTIMIZING SURFACE ROUGHNESS IN TURNING 40X STEEL BASED ON GENETIC PROGRAMMING AND GREY WOLF OPTIMIZATION ALGORITHMS

  Duong Xuan Bien, Do Manh Tung, Nguyen Van Nam, Le Van Tan, Do Tien Lap, Ta Huu Vinh, Le Thanh Binh

  108

  • pdf
• MECHANICAL DESIGN OF DUAL-ARMS FOR SOCIAL SERVICE ROBOT BASED ON NONVERBAL INTERACTION

  Nguyen Duc Tai, Nguyen Truong Thinh

  114

  • pdf
• THE INFLUENCE OF SOME PARAMETERS IN ATMOSPHERIC PLASMA SPRAY OF POWDER 85Ni15Al ON THE PARTICLE VELOCITY

  Vu Duong, Le Hong Ky

  118

  • pdf
• FABRICATION OF TiZr-BASED BULK METALLIC GLASS FOAM USING HOT-PRESSING AT DIFFERENT TEMPERATURES AND HOLDING TIMES

  Nguyen Van Tai , Nguyen Hoai Tan, Huynh Thanh Thuong, Pham Quoc Liet, Hoang Minh Thuan, Nguyen Van Cuong

  124

  • pdf
• RESEARCH ON COMPUTATION, DESIGN, EXPERIMENTATION OF THE THIN PART MANUFACTURING PROCESS INTEGRATING 3D PRINTING AND ROLLING TECHNOLOGY

  Ngo Quang Tu, Nguyen Duc Diep, Nguyen Tien Dinh, Le Minh Tuan An

  129

  • pdf
• EFFECT OF TECHNOLOGICAL WINDING PARAMETERS ON YARN PACKAGE DENSITY

  Tran Duc Trung, Dao Anh Tuan, Chu Dieu Huong

  135

  • pdf
• STUDY ON STRUCTURAL SIMULATION OF PICK-TO-PLACE ROBOT ON TOSHIBA DC650B HORIZONTAL PRESSURE CASTING MACHINE

  Nguyen Tien Sy, Nguyen Xuan Chung, Trinh Van Long

  143

  • pdf
• EFFECT OF PROCESSING PARAMETERS ON WARPAGE OF INJECTION MOLDED PARTS USING TAGUCHI METHOD

  Van-Long Trinh, Xuan-Chung Nguyen, Tien-Sy Nguyen, Huu-Hung Nguyen

  149

  • pdf
• CALCULATION AND LAYOUT DESIGN OF ASSEMBLY SYSTEM AND DETECTION OF PRODUCT ERRORS IN ELECTRONIC CIRCUIT BOARD MANUFACTURING

  Nguyen Quoc Tuan, Dinh Thi Thanh Tam

  153

  • pdf
• STUDY THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE ADHESION OF THE CrN HARD COATING TO THE SKD11 STEEL SUBSTRATE WAS MADE BY DC PULSE MAGNETRON SPUTTERING METHOD

  Tran Van Dua, Pham Duc Cuong

  159

  • pdf
• WIRE AND ARC ADDITIVE MANUFACTURING OF INCONEL ALLOYS: A REVIEW ON MICROSTRUCTURES, MECHANICAL PROPERTIES, AND COMMON DEFECTS

  Duc Manh Dinh, Van Thao Le, Quoc Hoang Pham

  164

  • pdf
• SCREENING MAIN FACTORS AFFECTING THE STABILITY OF 7.62MM PKMS GUNS USING PLACKETT-BURMAN DESIGN

  Duong Van Thach, Nguyen Thai Dzung, Nguyen Van Hung, Ta Duc Tam

  169

  • pdf
• ELECTROCHEMICAL MACHINING OF OIL GROOVED BUSHINGS

  Nguyen Minh Dat, Ngo Van Tuan, Duong Quoc Dzung

  178

  • pdf
• EXPERIMENTAL STUDY ON THE INFLUENCE OF FLUID FLOW PRESSURE ON THE WORKING EFFICIENCY OF COOLING TANKS

  Vu Thanh Truong, Dao Trong Thang, Nguyen Thi Hai Van

  183

  • pdf
• ARTIFICIAL NEURAL NETWORK-BASED OPTIMIZATION OF THE CRYOGENIC-INTERNAL DIAMOND BURNISHING PROCESS IN TERMS OF SURFACE QUALITY

  Nguyen Van Thai , Le Van An, Nguyen Trung Thanh

  189

  • pdf
• OPTIMIZING THE TECHNOLOGICAL PARAMETERS FOR SHEAR SPINNING OF A CONICAL COMPONENT ON A CNC LATHE

  Tran Duc Hoan, Lai Dang Giang, To Thanh Loan, Tran Phuong Thanh

  198

  • pdf
• CONDENSATION HEAT TRANSFER PERFORMANCE OF REFRIERANTS IN MULTIPORT MINI-CHANNEL TUBES: AN EXPERIMENTAL INVESTIGATION

  Pham Quang Vu

  203

  • pdf
• EFFECT OF ROAD SURFACE ON VIBRATION OF PASSENGER IN BUS VEHICLE

  Le Duy Long, Nguyen Thanh Quang, Le Hong Quan, Phi Hoang Trinh, Le Duc Hieu

  209

  • pdf
• ANALYZING RESISTANCE ON PNEUMATIC TIRES USING ENERGY MODEL

  Ngo Quang Tao, Nguyen Thanh Quang, Le Hong Quan

  213

  • pdf
• ANALYSIS OF EFFECT OF ROLLING RESISTANCE COEFFICIENT ON AUTOMOBILE FUEL CONSUMPTION

  Ngo Quang Tao, Nguyen Thanh Quang, Le Van Anh, Pham Minh Hieu, Le Duc Hieu

  216

  • pdf
• ANALYSIS OF VIBRATION EXPERIENCED BY PASSENGERS AND THEIR SEATS IN A BUS VEHICLE

  Le Duy Long, Nguyen Thanh Quang, Le Hong Quan, Pham Minh Hieu, Le Duc Hieu

  219

  • pdf
• RESEARCH ON REGENERATIVE BRAKE DESIGN USING MAGNETORHEOLOGICAL FLUID

  Nguyen Anh Ngoc, Vu Hai Quan, Nguyen Minh Tien, Tran Phuc Hoa, Nguyen Tien Dat, Duong Dinh Nghia

  222

  • pdf
• FREE VIBRATION ANALYSIS OF THE FUNCTIONALLY GRADED STEPPED CYLINDRICAL SHELLS USING THE CONTINUOUS ELEMENT METHOD

  Le Quang Vinh, Truong Thi Thu Huong, Nguyen Manh Cuong

  226

  • pdf
• IMPROVE PATH FOLLOWING EFFICIENCY FOR 4WD4WS ROBOT BY USING EXPONENTIAL FUNCTIONS IN VIRTUAL TARGET GUIDANCE ALGORITHM

  Kien Nam Dang, Vu Nguyen, Huy Quoc Vu

  231

  • pdf
• VIRTUAL INTERACTIVE TEACHING TECHNOLOGY AND TRAINING BASED ON AI, VAR

  Nguyen Thi Thanh, Le Huy Tung

  236

  • pdf
• STUDY OF DESIGN AND MANUFACTURE OF THE CONTROLLER OF HYBRID POWERTRAIN SYSTEM

  Pham Van Kien, Doan Thanh Son, Do Kim Hoang

  240

  • pdf
• ANALYSIS AND SIMULATION OF THE PUNCHING SYSTEM AT FACTORY NO. 1, THANGLONG METAL COMPANY

  Thi Minh Hue Pham, Thi Thanh Mai Nguyen, Viet Anh Nguyen, Thi Van Anh Vu, Van Thinh Nguyen

  245

  • pdf
• PERFORMANCE EVALUATION AND DEAR BASED OPTIMIZATION ON MACHINING LEATHER SPECIMENS TO REDUCE CARBONIZATION

  Hung Tran Quoc, Muthuramalingam T, Khaja Moiduddin, Son Nguyen Hoai

  249

  • pdf
• A STUDY ON THE DESIGN OF A NOVEL CLOSED-CHAIN ROBOT USING THE THEORY OF FINITE SYMMETRY GROUPS

  Thanh-Lam Bui , Dinh-Phong Dang, Bui-Tan-Dung Nguyen, Ha-Linh Tran, The-Toan Hoang, Ngoc-Tien Tran

  253

  • pdf
• RESEARCH ON CRANE BEAM CALCULATION METHODS TO REDUCE SIMULATION COMPUTATION TIME

  Nguyen Hong Tien, Vu Phu Quyen, Le Don Nguyen

  257

  • pdf