RESEARCH ON MANUFACTURING OF CATALYTIC BOXES FOR ENGINE EXHAUST TREATMENT BY COATING OF NICKEL NANOCOMPOSITES WITH CERIUM DIOXIDE

  • Nguyễn Đức Hùng
  • Đào Khánh Dư

Abstract

Catalytic exhaust treatment has been studied by making CeO2coated steel sheets. The catalytic surface area reached 2.32 m2and the volume space to achieve exhaust emission levels of 0.638 cm3and the amount on-surface catalyst was determined  to be of 3.39 ÷ 6.74%, which all are equivalent to those parameters of imported ceramic form. With the made device the optimal position to localize the catalytic box was found, for which the system was capable of handling gas HC emissions of 29.1 % as measured by oxygen sensor. With the engine operating regime without sensor, the amount of treated HC and CO were 41% and 67%, respectively. The performance of exhaust gases treatment by use of the CeOatalytic coated steel sheets exhibited to improve  significantly for the working temperature of 400 oC which was gained when the engine operating at high speed mode. 
điểm /   đánh giá
Published
2014-11-26
Section
Articles